BASIC INSTRUCTIONS

STEP 1		STEP 2		STEP 3
STEP 4		STEP 5		STEP 6

• Connect your handpiece or coupler to the Smart Cleaner.
• Undo threaded handle.
• Remove plunger.
• Half-fill the Smart Cleaner with warm water.
• Insert the plunger and push.

SMART CUPPER INSTRUCTIONS

• Remove the bore cup from the Smart Cupper and insert the bur end into the handpiece.
• Position the hole of the bore cup over the blocked spray port in the handpiece.
• Place the bore cup (with handpiece attached) into the Smart Cupper and tighten the screw to hold it in place.
• Follow the instructions for normal use of the Smart Cleaner.

SMART CONNECT INSTRUCTIONS

• Connect the Smart Connect to the Smart Cleaner.
• Attach the contra angle to the Smart Connect.
• Follow the instructions for normal use of the Smart Cleaner.